How to Get Rid of Too Much Algaecide in Pool

Nobody likes to swim in a pool full of algae and other contaminants, bacteria, and materials. 

That is why you need to add algaecide to your pool, but sometimes you might find yourself adding excess chemicals. 

This article looks at everything you would need to know about pool algaecide and how to eliminate the foam.

How to Get Rid of Too Much Algaecide in Pool

What is Algaecide?

Algaecide is a pool chemical that helps remove algae and thwart it from developing again in your pool. 

The product works by interrupting these plants’ critical life process – like spotting photosynthesis or bursting the algae cell.

Algaecides are more useful when they are added to a pool with chlorine.

You should ensure that you use the right kind of chlorine for your swimming pool – that depends on the pool’s needs, budget, and type of pool.

Types of Algaecides

Copper-based algaecide: It is quite common, but you should avoid it if you have a Baquacil pool or your pool experiences metal staining. 

Quat or Polyquat Algaecide: This type of algaecide is safe to use but can quickly cause foam if added excessively. 

How Long Does it Take for Algaecide to Dissipate?

The foam from algaecide dissipates over time as this chemical breaks down slowly. 

You can use more chlorine if you want the algaecide to disappear faster, but that is not recommended because it goes away within seven days.

Can You Add to Much Algaecide in Your Pool?

Many people ask whether they can add too much algaecide in the pool, and the answer is yes. 

You will notify a foamy on the water if you add more algaecide that what your pool needs. 

Another way to figure out if the algaecide is excess is by looking for air pockets at the filtration system – you will notice some bubbles.

The foam and bubbles occur due to excessive algaecide and are small than what other chemicals cause.

How Long Should You Wait Before You Swim After Adding Algaecide?

You are recommended to wait for about 15 minutes before diving into your swimming pool after adding this chemical. 

Algaecides contain copper, which is not quite harmful to your body, even if used in excess. 

That means is it is safe to swim immediately if you add the right levels of algaecide.

You can also notice signs of too much algaecide by skin and eye irritation.

The solution to Too Much Algaecide 

Adding excessive algaecide is counterproductive to your swimming pool. 

The chemical will have a more challenging time working when it gets saturated in the pool’s water.

With that said, there is not much you can do to get rid of algaecide foam except leaving it to dissipate naturally. 

Backwashing, evaporation, and swimmer usage are other ways to eliminate too much algaecide from your pool.

Lastly, you can drain some water from your pool and then add more.

In Conclusion

Always add the required amount of algaecide to ensure that you swim in a safe swimming pool. 

The signs of excess algaecide in water include foam and eyes and skin irritation.

Pebble Tec vs Diamond Brite: Which One is Better?

Are you building a swimming pool and wondering whether to use Pebble tec or Diamond Brite?

The article looks at Pebble Tec vs Diamond Brite to give you an idea of what these pool designs have on offer. 

Pebble Tec vs Diamond Brite

Pebble Tec Pool Finish 

Pebble Tec is a modern and popular swimming pool finish material used for a new pool or resurfacing an old one.  

It is a more expensive design than plaster, but of better quality when you want to resurface your facility.

Pebble Tec is formed by mixing small and large natural pebbles from earth or black sand beaches. 

It is turned into a cement blend made up of pebble stones. 

They provide you with a bottom that resembles that of a Riverbend or creek.

Some of the benefits of Pebble Tech are:

  • Aesthetics: Pebble Tec finishes provide a modern, natural, and clean look, primarily due to the creative design. 
  • Durability: These surfaces can last for over 20 years when maintained properly.
  • Choices: Pebble Tec comes with at least five finishes: PebbleBrilliance, PebbleFina, PebbleSheen, and PebbleTech.  

Diamond Brite Pool Finish

Diamond Brite pool finish is a blend of quartz aggregates and crushed white Portland cement, and you can use it for resurfacing or new pools. 

These products are blended in the factory to provide you with durable material that can make your pool attractive.

Unlike Pebble Tec, Diamond Brite is mainly used for resurfacing a pool, and here are the reasons why you should use it:

  • Chemical Resistance: Diamond Brite is made of insoluble material that is unaffected by pool chemicals.
  • Resist Stains: You can bet that the material remains free of stains that can occur due to pool chemicals. 
  • Hard to Damage: The surface allows you to drain your pool, clean it, and add water without getting damaged. 
  • Different Color: Diamond Brite allows you to choose from a variety of colors to meet your needs. 
  • Durability: The surface can last for about 15 years when you maintain it. 

Which One to Buy?

Pebble Tec is more durable than Diamond Brite and can continue to give you service for years without getting damaged. 

Pebble Tec is mainly used for new swimming pools, while Diamond Brite works best when resurfacing an old facility. 

The two products make a pool to be more attractive and make it more welcoming. 

In Conclusion

If you want a long-lasting surface, go for Pebble Tec Pool Finish. With that said, consider Diamond Brite Pool Finish if you want a variety of colors.